HN Vent's high quality Thermo Mechanically Treated (TMT) bars are manufactured using the most contemporary technology available worldwide and supervised by metallurgists and engineers. Through the DRI process, the basic steel is produced from virgin iron ore. The salient features of the rolling mill include an extensive billet yard for cast-wise stacking of billets, reheating furnace, pre-finishing & finishing mill, continuous shear to cut bars, roughing mill, intermediate mill, besides the most modern TMT facilities.

Our TMT steel bars are made using the 'Quenching & Tempering' (Q & T) technology. This technology is introduced by "SSS" Technologies. A contemporary technology, it allows the production of bars to be on par with international standards. Hot rolled from steel billets and subjected to PLC-controlled online thermo-mechanical treatment, the bars are made to pass through heat treatment over three successive stages.


Technical Standards of the product

Nominal Diameter (mm)

Weight (Mg / Mtr.)

Length (Mtr.)

6

0.222

Coil Form

8

0.395

 

Coil form / Straight

10

0.617

12

0.89

16

1.58

 

 

5.5 to 13.5

20

2.47

25

3.85

28

4.83

32

6.31

36

7.99

40

9.85

45

12.5


  Ask for a similar Product

Similar Products

© Copyright 2014 HN Ventures.